Alle producten
Contactpersoon :
lei
Telefoonnummer :
13266828705
zoekwoorden [ low density polyethylene pellet blown film ] bij elkaar passen 22 producten.
Lupolen 2427H LyondellBasell
| Verwerkingstemperatuur: | 160-200°C |
|---|---|
| Smeltingsindex: | 10,9 g/10 min |
| Strandhardheid (strand D): | 42D |
HI-ZEXTM 3300f Prime Polymer
| Density: | 0.95 g/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg): | 1.1 g/10 min |
| Shore Hardness （D): | 62 |
HI-ZEXTM 7000f Prime Polymer
| Density: | 0.952 g/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg): | 0.04 g/10 min |
| Shore Hardness （D): | 64 |
Petroteen GA502022 LyondellBasell LLDPE
| Dichtheid (23°C): | 0.918 g/cm3 |
|---|---|
| Melt mass-flow rate (MFR) (190°C/2,16 kg): | 2 g/10 min |
| Verwerkingsmethode: | Blown Film Cast Film Film Extrusie |
Het product is bedoeld in de bijlage bij Verordening (EG) nr. 1907/2006 van het Europees Parlement en de Raad.
| Dichtheid (23°C): | 0.918 g/cm3 |
|---|---|
| Melt mass-flow rate (MFR) (190°C/2,16 kg): | 2 g/10 min |
| Verwerkingsmethode: | Blown Film Cast Film Film Extrusie |
Petrothene® Ga50224 LyondellBasell LLDPE
| Dichtheid (23°C): | 0.918 g/cm3 |
|---|---|
| Melt mass-flow rate (MFR) (190°C/2,16 kg): | 2 g/10 min |
| Verwerkingsmethode: | Blown Film Cast Film Film Extrusie |
EvolueTM SP2540 Prime Polymer Metallocene
| Melt mass-flow rate (MFR): | 30,8 g/10 min |
|---|---|
| Dichtheid: | 0.924 g/cm3 |
| Verwerkingsmethode: | gegoten film |
Lupolen 2420F LyondellBasell LDPE
| Verwerkingstemperatuur: | 160-200°C |
|---|---|
| Smeltingsindex: | 00,75 g/10 min |
| Toepassingen: | Film, spuitgieten, coating |
Petrothene® Na209009 Lyondellbasell Ldpe
| Dichtheid: | 0.925 g/cm3 |
|---|---|
| Smelte doorstroming (MFR) (190°C/2,16 kg): | 23 g/10 min |
| Verwerkingsprocédés: | Extrusie, geblazen film |
Hdpe Hi-ZexTM 5100e Prime Polymer
| Density: | 0.958 g/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg): | 0.98 g/10 min |
| Verpakking Details: | 25 ton in een container van 40 voet |