Alle producten
Contactpersoon :
lei
Telefoonnummer :
13266828705
LLDPE-film extrusie lineaire polyethyleenpellets met lage dichtheid Petrothene GA501
| Dichtheid (23°C): | 0.918 g/cm3 |
|---|---|
| Melt mass-flow rate (MFR) (190°C/2,16 kg): | 1 g/10 min |
| Verwerkingsmethode: | Film-extrusie |
Prime Polymer Evolue Sp3010 Geblazen film
| Melt mass-flow rate (MFR): | 00,8 g/10 min |
|---|---|
| Dichtheid: | 0.926 g/cm3 |
| Verwerkingsmethode: | Opgeblazen film |
Prime Polymeer Evolue Sp2120
| Melt mass-flow rate (MFR): | 2.2 g/10 min |
|---|---|
| Dichtheid: | 0.921 g/cm3 |
| Verwerkingsmethode: | Opgeblazen film |
Polyethyleen LLDPE Granulaat Biobased Sugarcane Braskem Groen PE SLL318
| Dichtheid (23°C): | 0.918 g/cm3 |
|---|---|
| Melt mass-flow rate (MFR) (190°C/2,16 kg): | 2.7 g/10 min |
| Het vormen temperatuur: | 170 -180 °C |
Biobased suikerriet LLDPE Polyethyleengranulaat Braskem Green PE SLL118/21
| Dichtheid (23°C): | 0.918 g/cm3 |
|---|---|
| Melt mass-flow rate (MFR) (190°C/2,16 kg): | 1 g/10 min |
| Verwerkingsmethode: | Geblazen film, filmextrusie |
Braskem Green PE SLL118 Biobased Sugarcane Polyethyleen LLDPE Plastic Granules
| Dichtheid (23°C): | 0.916 g/cm3 |
|---|---|
| Melt mass-flow rate (MFR) (190°C/2,16 kg): | 1 g/10 min |
| Verwerkingsmethode: | Geblazen film extrusie. |
Biobased suikerriet polyethyleen LLDPE granulaten Braskem Groen PE SLH218
| Dichtheid (23°C): | 0.916 g/cm3 |
|---|---|
| Melt mass-flow rate (MFR) (190°C/2,16 kg): | 2.3 g/10 min |
| Verwerkingsmethode: | Geblazen film extrusie. |
Prime Polymer Evolue SP2040 gegoten film Mlldpe
| Melt mass-flow rate (MFR): | 30,8 g/10 min |
|---|---|
| Density: | 0.918 g/cm³ |
| Verwerkingsmethode: | gegoten film |
Prime Polymer Evolue SP1540 gegoten film Mlldpe
| Melt mass-flow rate (MFR): | 30,8 g/10 min |
|---|---|
| Dichtheid: | 0.913 g/cm3 |
| Verwerkingsmethode: | gegoten film |
Biobased suikerriet LLDPE lineaire polyethyleengranulaten met lage dichtheid Braskem LH0820/30AF
| Dichtheid (23°C): | 0.918 g/cm3 |
|---|---|
| Melt mass-flow rate (MFR) (190°C/2,16 kg): | 00,8 g/10 min |
| Verwerkingsmethode: | Geblazen film, filmextrusie |